Sealing Engineering

ISO 3601-1 O-Ring Groove Depth and Width Calculator

ISO 3601-1 O-Ring Groove Depth and Width Calculator engineering calculator.

Quick Answer

Calculate ISO 3601-1 O-Ring Groove Depth and Width Calculator

Calculator

Gland depth and width magnitude (m)
—

ToolFusion Engineering Network

Need Equipment or a Supplier for This Project?

Use your calculation result to continue with equipment selection, supplier discovery, engineering support, or project evaluation.

Find Engineering Solutions →

Result Interpretation

ISO 3601-1 O-Ring Groove Depth and Width Calculator computes Gland depth and width magnitude in m using the defined engineering formula and the input values provided. Gland depth and width magnitude is expressed in m. No universal acceptance threshold is defined by this calculator.

Worked Example

Verified calculation

Given:

  • Nominal groove width = 0.0025
  • Nominal groove depth = 0.0018

Expected Result:

  • Gland depth and width magnitude = 0.0030805843602792

Engineering Interpretation:

Under the given input conditions, the calculated result is: Gland depth and width magnitude = 0.0030805843602792 m.

The actual numerical result is computed by the Runtime engine using the persisted tool definition. The values shown here come from automatically validated test cases.

Formula / Method

gland depth and width magnitude = sqrt(pow(nominal groove width, 2) + pow(nominal groove depth, 2))

Formula family: formula_sealing_o_ring_groove_dimension_calculator_per_iso_3601_

Variables

SymbolLabelRoleDescription
gland_width_nominal Nominal groove width INPUT Nominal groove width
gland_depth_nominal Nominal groove depth INPUT Nominal groove depth
result Gland depth and width magnitude OUTPUT Gland depth and width magnitude

Calculation Steps

  1. Enter the nominal groove width in m.
  2. Enter the nominal groove depth in m.
  3. Step 1: Compute gland depth and width magnitude.
  4. Read the gland depth and width magnitude (m) from the results.

Engineering Summary

Calculate ISO 3601-1 O-Ring Groove Depth and Width Calculator

Frequently Asked Questions

What does this calculator calculate?

The ISO 3601-1 O-Ring Groove Depth and Width Calculator estimates Gland depth and width magnitude based on the input parameters you provide

Why is nominal groove width important in this calculation?

nominal groove width is used directly in the calculation of gland depth and width magnitude. Its effect on the result depends on the complete formula and the values of the other inputs.. When you enter nominal groove width in m, the calculator uses it in the engineering formula to compute the output

How should I interpret the result gland depth and width magnitude?

The calculator outputs gland depth and width magnitude in m. The result is computed directly from the input values using the defined engineering formula

What units should I use for the inputs?

Enter each value in the units shown next to the input field: Nominal groove width (m), Nominal groove depth (m). Make sure all inputs use the specified units for consistent results

What assumptions does this calculator use?

This calculator uses automatically validated engineering formulas. Results are approximate and should be validated against site-specific conditions, applicable codes, and professional engineering judgment

Related Tools

Browse More Tools

Explore the full index of engineering calculators on this vertical site.